ANSTEEL
A36 Carbon Steel Bar

A36 Carbon Steel Bar

A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the most specified structural steel plate by engineers. ASTM A36 is most commonly manufactured as a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its lowest yield point, A36 can be used to design lighter-weight structures and equipment, and provide good weldability.

A36 Carbon Steel Bar

A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the most specified structural steel plate by engineers. ASTM A36 is most commonly manufactured as a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its lowest yield point, A36 can be used to design lighter-weight structures and equipment, and provide good weldability.

MORE >>

AISI/SAE 1025 Carbon Steel Bar

AISI/SAE 1025 Carbon Steel Bar

1025 carbon steel is a steel that contains only carbon as its main alloying element. These steels also contain 0.4 percent silicon and 1.2 percent manganese. Small amounts of copper, nickel, molybdenum, aluminum and chromium can also be detected in carbon steel.

AISI/SAE 1025 Carbon Steel Bar

1025 carbon steel is a steel that contains only carbon as its main alloying element. These steels also contain 0.4 percent silicon and 1.2 percent manganese. Small amounts of copper, nickel, molybdenum, aluminum and chromium can also be detected in carbon steel.

MORE >>

AISI/SAE 1045 C45 Carbon Steel Bar

AISI/SAE 1045 C45 Carbon Steel Bar

1045 is characterized by medium carbon, medium tensile strength steel, which has quite good strength, machinability and reasonable weldability under hot-rolled conditions. 1045 round steel can be provided with hot rolling, cold drawing, rough turning or turning and polishing. By cold-drawing the 1045 steel bar, the mechanical properties can be improved, the dimensional tolerance can be improved, and the surface quality can be improved.

AISI/SAE 1045 C45 Carbon Steel Bar

1045 is characterized by medium carbon, medium tensile strength steel, which has quite good strength, machinability and reasonable weldability under hot-rolled conditions. 1045 round steel can be provided with hot rolling, cold drawing, rough turning or turning and polishing. By cold-drawing the 1045 steel bar, the mechanical properties can be improved, the dimensional tolerance can be improved, and the surface quality can be improved.

MORE >>

AISI/SAE 4130 Carbon Steel Bar

AISI/SAE 4130 Carbon Steel Bar

4130 cold-rolled round bars provide some recognized weldability without affecting the wear and impact resistance of the steel, carbon steel 4130 bars also have excellent machining properties and can be heat treated. At the same time, it has high tensile strength and high yield strength.

AISI/SAE 4130 Carbon Steel Bar

4130 cold-rolled round bars provide some recognized weldability without affecting the wear and impact resistance of the steel, carbon steel 4130 bars also have excellent machining properties and can be heat treated. At the same time, it has high tensile strength and high yield strength.

MORE >>

AISI/SAE 4140 Carbon Steel Bar

AISI/SAE 4140 Carbon Steel Bar

4140 is a 1% chromium-molybdenum medium hardenability general-purpose high-strength steel, usually hardened and tempered in the tensile range of 850-1000 Mpa (condition T). 4140 now have improved machinability, which greatly increases feed and/or speed, while extending tool life without affecting mechanical properties. The prehardening and tempering 4140 can be further case hardened by flame or induction hardening and nitriding.

AISI/SAE 4140 Carbon Steel Bar

4140 is a 1% chromium-molybdenum medium hardenability general-purpose high-strength steel, usually hardened and tempered in the tensile range of 850-1000 Mpa (condition T). 4140 now have improved machinability, which greatly increases feed and/or speed, while extending tool life without affecting mechanical properties. The prehardening and tempering 4140 can be further case hardened by flame or induction hardening and nitriding.

MORE >>

AISI/SAE 4340 Carbon Steel Bar

AISI/SAE 4340 Carbon Steel Bar

AISI 4340 alloy steel is a heat treatable low alloy steel containing chromium, nickel and molybdenum. It has high toughness and high strength under heat treatment conditions.

AISI/SAE 4340 Carbon Steel Bar

AISI 4340 alloy steel is a heat treatable low alloy steel containing chromium, nickel and molybdenum. It has high toughness and high strength under heat treatment conditions.

MORE >>

AISI/SAE 5160 Carbon Steel Bar

AISI/SAE 5160 Carbon Steel Bar

Steel is a versatile material. One steel alloy is AISI 5160, which is an American Society for Testing and Materials (ASTM) designation for spring steel.

AISI/SAE 5160 Carbon Steel Bar

Steel is a versatile material. One steel alloy is AISI 5160, which is an American Society for Testing and Materials (ASTM) designation for spring steel.

MORE >>

AISI/SAE 8620 Carbon Steel Bar

AISI/SAE 8620 Carbon Steel Bar

AISI 8620 alloy steel is a common carburizing alloy steel. This alloy steel is flexible during the hardening process, thus improving the case/core properties.

AISI/SAE 8620 Carbon Steel Bar

AISI 8620 alloy steel is a common carburizing alloy steel. This alloy steel is flexible during the hardening process, thus improving the case/core properties.

MORE >>

A572/S355JR Carbon Steel Bar

A572/S355JR Carbon Steel Bar

A572 steel bars are lightweight, but have good strength, ductility and workability, making them ideal for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.

A572/S355JR Carbon Steel Bar

A572 steel bars are lightweight, but have good strength, ductility and workability, making them ideal for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.

MORE >>

< 12 >
ANSTEEL

Our products are sold well all over the country and exported to more than 100 countries and regions such as the European Union, the United States, Australia, South America, Southeast Asia, the Middle East and so on, and we are the global supplier of many international famous enterprises.

Submit
%{tishi_zhanwei}%

CONTACT US

Email:Marina@ansteelglobal.com

WhatsApp:+8618953293379

Tel:+8618953293379

WhatsApp
WhatsApp

CEGLOBAL    SEO

Business license

Copyright QINGDAO ANSTEEL GROUP CO., LTD.

Welcome friends to visit our factory at any time!

We will respond to your questions as soon as possible

Our products are sold well all over the country and exported to more than 100 countries and regions such as the European Union, the United States, Australia, South America, Southeast Asia, the Middle East and so on, and we are the global supplier of many international famous enterprises.

Submit